FAQ
Straight answers about pool service in Central Florida
Prices, chemistry, scheduling and the questions people are slightly embarrassed to ask. Do not be. Everybody's pool has gone green at least once.
Weekly pool service in Seminole County, Florida typically costs $130 to $220 a month with chemicals included. Pools here need weekly service year round because Florida sun burns off chlorine within hours. Target chemistry is free chlorine 2 to 4 ppm, pH 7.4 to 7.6 and total alkalinity 80 to 120 ppm.
How much does pool service cost in Seminole County, Florida?
Weekly residential pool service typically runs $130 to $220 a month with chemicals included. Pool size, tree cover, whether you have a screen enclosure and whether there is an attached spa are what move the number. Green pool cleanups run $250 to $600 and are quoted separately.
How often should a pool be cleaned in Florida?
Weekly, year round. Florida sun destroys unstabilized chlorine within hours and warm water grows algae fast. A pool left 14 days between visits in summer spends the second week effectively unprotected.
What are the correct chemical levels for a Florida pool?
Free chlorine 2 to 4 ppm, pH 7.4 to 7.6, total alkalinity 80 to 120 ppm, calcium hardness 200 to 400 ppm and cyanuric acid 30 to 50 ppm. Salt pools should hold 2,700 to 3,400 ppm of salt.
Do you require a contract?
No. Gil Pool Service is month to month. Cancel with a phone call.
Are chemicals included in the monthly price?
Yes. Standard chlorine, acid, shock, stabilizer and balancing chemicals are included. Specialty treatments are quoted separately and explained before we use them.
Will the same technician service my pool each week?
Yes. You get a fixed day and a fixed tech. That continuity is how small problems get caught before they become repairs.
Do you service pools in the winter?
Yes, and we recommend it. Central Florida pools stay warm enough that algae never fully stops. Pausing service from December through February usually costs more in a spring cleanup than it saved.
How long should I run my pool pump in Florida?
Enough to turn the water over at least once a day. On most residential pools that is roughly 8 to 12 hours in summer and 6 to 8 in winter for a single speed pump, or longer at low speed on a variable speed pump. Exact run time depends on pool volume and pump flow rate.
Can I swim right after service?
Usually within about 20 to 30 minutes, once chemicals have circulated. If we shock the pool or add a specialty treatment we will tell you exactly how long to wait.
Do you work on saltwater pools?
Yes. Salt pools are extremely common in Central Florida. We monitor salt level, check cell output and clean scaled cells, and we replace cells when they reach end of life.
What if my pool is green right now?
Call us. Most Central Florida green pools clear in three to five days. We quote the job, not the number of days, so it does not cost more if the pool fights us.
Do you serve HOA and commercial pools?
Yes. Commercial, condo and HOA pools get documented visits with chemical readings, photos and reporting your board or property manager can hand to an inspector.
What areas do you cover?
Oviedo, Winter Springs, Lake Mary, Longwood, Sanford, Casselberry, Chuluota and Winter Park, Florida, plus the surrounding Seminole County and north Orange County area.
How do I get a quote?
Call or text (407) 687-6710, or use the quote form. We look at the pool, test the water, check the equipment and give you a flat monthly number, usually the same day.
Full chemistry reference
| Reading | Target range | Why it matters here |
|---|---|---|
| Free chlorine | 2.0 to 4.0 ppm | Florida sun burns off unstabilized chlorine in hours. Below 1 ppm, algae starts the same day. |
| pH | 7.4 to 7.6 | High pH makes chlorine lazy and clouds the water. Low pH eats plaster, grout and equipment seals. |
| Total alkalinity | 80 to 120 ppm | This is what keeps pH from swinging every time it rains. |
| Calcium hardness | 200 to 400 ppm | Sanford and Chuluota well water runs high. Too much and you get scale on tile and the salt cell. |
| Cyanuric acid | 30 to 50 ppm | Sunscreen for your chlorine. Too little and it evaporates. Too much and the chlorine stops working. |
| Salt (salt pools) | 2,700 to 3,400 ppm | Low salt starves the cell and shortens its life. Cells run $500 and up to replace. |
| Filter pressure | Within 8 psi of clean | Once it climbs 8 to 10 psi over the clean reading, flow drops and the water goes dull. |